Unelko IVSMVTSGCM Invisible Shield Microburst Vertical Two-Sided Glass Coating Machine

The New Microburst Vertical Glass Coating Machine took some time to develop, however it is the best performing glass coating machine of its kind in the industry and is unmatched from an operational, performance and safety standpoint. The compact, high output, two-sided vertical coating machine is extremely efficient. It utilizes ultraviolet (UV) and infrared (IR) curing to instantly bond Unelko’s top rated Invisible Shield PRO 15 coating to both sides of almost any size commercial glass. It can treat 70 sq. ft. of glass per minute and 4,200 sq. ft. per hour with a high performance, hydrophobic/oleophobic coating on glass that then leaves the machine fully cured/bonded, protected and 99% clean. Unlike other glass coating machines that require extensive handling, expensive product vials, long curing times, offer inferior performance and/or require excessive cleaning, the Invisible Shield Glass Coating Machine is fully automated and is time, energy, product, and performance efficient.

Directions For Use:
For semi-manual application:
(1) Thoroughly saturate a cotton or microfiber applicator with Invisible Shield PRO 15 and apply onto the glass using a firm and overlapping motion, or spray the product directly onto the glass using an air or airless fine mist sprayer. Wipe/polish the product directly onto the glass using a firm and overlapping motion.
(2) Allow the product to dry for several minutes until the solvent has completely evaporated. Re-apply the coating to ensure complete coverage and optimum protection. Allow to dry until a slight haze has formed.
(3) Remove any excess haze by rinsing the glass with clean water and polish dry with a cotton or microfiber applicator or squeegee until crystal clear.
Other features:
Height capacity 84 inches of glass treated in one minute.
All electronics are explosion proof with built-In safety system.
Our durable protective coating increases scratch resistance up to 93%.