Skip to main content
PRO-BLUE NON-ACID FOAMING CONCENTRATE OUTDOOR CONDENSER COIL CLEANER, HEAVY DUTY, 1 GALLON

Roll over image to zoom in

Diversitech 2491385 PRO-BLUE NON-ACID FOAMING CONCENTRATE OUTDOOR CONDENSER COIL CLEANER, HEAVY DUTY, 1 GALLON

Item #: 2491385 by DiversiTech

See reviews See reviews

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

Pack Size

1

UNSPSC

47131819

Features:

  • Cleans and brightens
  • Vigorous foaming action
  • Non-acid formula


Benefits:

  • Leaves the coil clean and bright equal to or better than traditional acid formulations
  • Rapidly penetrates and loosens soil. Expanding foam extends contact time and lifts soil located deep within the coil. Foam and dirt are easily rinsed with water
  • Does not contain hazardous hydrofluoric acid. The product is non-fuming and is non corrosive to ferrous metals.


Application:

  • Pro-Blue is a specially formulated, non-acid foaming condenser coil cleaner. Pro-Blue is blended with aggressive cleaning agents, detergents and rinse additives to provide thorough cleaning with easy rinsing. Pro-Blue restores coil appearance and efficiency.


MIX RATIO:

  • 1:3 Mix 1 part Pro-Blue with 3 parts water.


Directions:

  • 1. For outdoor use only. Wear protective goggles and gloves. Avoid breathing spray mist or vapors
  • 2. Apply with a chemical resistant sprayer adjusted for coarse spray to minimize misting
  • 3. Mix one part Pro-Blue with three parts water to achieve maximum foaming and soil lifting action. For moderately dirty or greasy condenser coils, Pro-Blue is effective when mixed with up to ten parts water
  • 4. Shut system off, then spray the Pro-Blue solution into the coil fins from the bottom up
  • 5. Allow three to five minutes to achieve maximum foaming and cleaning, then thoroughly flush the surface with clean water. After use, thoroughly rinse sprayer with clean water
  • 6. Return the system to