RECENTLY VIEWED
Skip to main content
DK Hardware Professional Tax Exempt? Net 30? - DK Net Terms
Roll over image to zoom in
Product Features
Product Overview
Related Videos
Reviews
Questions & Answers
CRL LSGM1BS Brushed Stainless Laguna Series Single Sliding Door Glass Mount Installation Assembly
Item #: LSGM1BS by CR Laurence
Item Discontinued!See reviewsSee reviews
The item is currently out of stock and it may or may not be restocked
OUT OF STOCK
30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.
Features
Shipping Weight
30 lb (13.61kg)
Color
Brushed Stainless
Product Overview
The CRL Laguna Series Single Sliding Door Glass Mount Installation Assembly contains all of the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching a single sliding door in an 'all-glass' opening where you have a wall on one end next to the door, a glass transom above the door, and a fixed glass panel on the other side of the door. The Sliding Door Rollers can be attached to the glass with either countersunk or cap style attachment fasteners (both are supplied). The Rollers have a 1/8 inch (3.2 millimeter) +/- vertical adjustment to aid in door alignment. The CRL Cat. No. LSSW1 Spanner Head or CRL Cat. No. SW19 Spanner Wrench can be used to secure and tighten the LS100BS Top Rollers to the glass door panel. This system should be used with 3/8 inch or 1/2 inch (10 or 12 millimeter) tempered glass only. Laminated glass cannot be used in this system.
NOTE: CRL Cat. No. FP214BS 2-1/4 inch (57.2 mm) diameter Brushed Stainless Steel Thru-Glass Pull can be used, however it is offered as an option and not included in the Assembly. The thickness of the FP214BS Thru-Glass Pull doesnººt impede movement in front of the glass sidelite, and allows for a full door opening access.
You can also use CRL Cat. No. 60LPBS 60 inch (1524 mm) or Cat. No.48LPBS 48 inch (1219 mm) Brushed Stainless Steel Ladder Style Pull Handles as an option, however these pulls slightly reduce the door opening access. The Door Stops should be adjusted to prevent ºººover travelºº.
Also, you can use CRL Cat. No. LS106BS Brushed Stainless Steel Top Sliding Tube Wall Mount End Clamp as an option.
SYSTEM LIMITATIONS:
The following are recommended limitations for this system:
minimum panel width: 37-13/16" (960 mm)
maximum panel width: 53-9/16" (1360 mm)
maximum panel weight: 220 lbs (100 kg)
The panel height should never exceed 2.5 times the width of the panel
Maximum available length of the top track is 104" (2640 mm)
Please contact Technical Sales if any of these limitations cannot be met.Important Notes
NOTE: CRL Cat. No. FP214BS 2-1/4 inch (57.2 mm) diameter Brushed Stainless Steel Thru-Glass Pull can be used, however it is offered as an option and not included in the Assembly. The thickness of the FP214BS Thru-Glass Pull doesnººt impede movement in front of the glass sidelite, and allows for a full door opening access.
You can also use CRL Cat. No. 60LPBS 60 inch (1524 mm) or Cat. No.48LPBS 48 inch (1219 mm) Brushed Stainless Steel Ladder Style Pull Handles as an option, however these pulls slightly reduce the door opening access. The Door Stops should be adjusted to prevent ºººover travelºº.
Also, you can use CRL Cat. No. LS106BS Brushed Stainless Steel Top Sliding Tube Wall Mount End Clamp as an option.
SYSTEM LIMITATIONS:
The following are recommended limitations for this system:
minimum panel width: 37-13/16" (960 mm)
maximum panel width: 53-9/16" (1360 mm)
maximum panel weight: 220 lbs (100 kg)
The panel height should never exceed 2.5 times the width of the panel
Maximum available length of the top track is 104" (2640 mm)
Please contact Technical Sales if any of these limitations cannot be met.Important Notes
NOTETHESE FITTINGS ARE NOT FOR USE WITH LAMINATED GLASS.