Shower Door Sweep Replacement

The door sweep is one of the most important components of the bathroom or shower. Worn out door sweeps fail to do a good job of preventing water from seeping out, which in turn, can damage the bathroom floor over time. If you're looking at replacing your shower door sweep and plan to order CRL's popular frameless shower door hardware, wipes and seals, consider these suggested clearances/gaps.

Polycarbonate 'U' with bulb attachment

The clear polycarbonate 'U' with bulb attachment is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft bulb portion of the seal allows doors to swing both in and out of the enclosure if needed. PCR10

Polycarbonate 'H' jamb for 180 degree

The clear polycarbonate 'H' jamb is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. For 3/8'' glass size and a suggested gap of 3/16'', CRL offers the P380HJ.

Co-extruded clear bottom wipe with drip rail

The clear bottom wipe with drip rail snaps onto the bottom of the door. P990WS is a popular option for glass size of 3/8'' and a suggested gap of 7/16''.

'Y' inline panel seal for 180 degree

Intended for 180 degree inline glass-to-glass applications, the PCC10 needs to be snapped onto the fixed panel with the lip on the strike side. The 'U' portion PVC is rigid with a single leg made of soft vinyl.

Seal gaps from 3/16'' to 1/4''

Transculent 'V' seals are used only on doors swinging one way to seal gaps from 3/16'' to 1/4''. To adhere the 5/16'' rigid leg to glass edge or wall, CRL's Clear Very Hi-Bond Tape can be used. Another option with already pre-applied tape is available: SDTST2.

The door closes into a soft vinyl leg.

Multi-purpose 'H' wipe

Versatile multi-purpose 'H' wipe has two rigid legs and two soft legs. It can be used as a bottom sweep or as a seal if run vertically up the edge of the door. One or both soft can be trimmed to accommodate many installation options. P375HW

Transculent silicone bulb seal

Designed for inswing or outswing doors, the product closes gaps from 1/16'' to 3/16''. Translucent silicone bulb seal adheres to the glass edge or wall by applying silicone only, so Very High-Bond Tape cannot be used (CRL's Clear Silicone can be purchased). S1LB

For more products check out our Shower Door Sweeps category.